LAN
DC IN
PoE
Package Contents
Minimum Requirements
+
Broadband Internet Service
(Cable or DSL Modem)
+
Internet Browser
(Internet Explorer, Safari, Firefox, Chrome)
A) Remove the rear bottom panel.
B) Connect one end of the Ethernet cable into the LAN(PoE) port of the
AP/Bridge and the other end to the PoE Ethernet port on the PoE injector.
C) Connect the Power Adapter to the DC-IN port of the AP/Bridge and plug
the other end into an electrical outlet.
D) Connect the second Ethernet cable into the LAN port of the PoE injector
and the other end to the Ethernet port on the computer.
E) Place the panel removed from step A back into the device.
F) Screw on the provided antenna/s to the top of device.
Note: The AP/Bridge should ONLY be powered via Ethernet cable
connected to the included PoE Injector.
A) Once your computer is on, ensure
that your TCP/IP is set to On or
Enabled. Open Network
Connections and then click Local
Area Connecton. Select Internet
Protocol Version 4 (TCP/IPv4).
B) If your Computer is already on a
network, ensure that you have
set it to a Static IP Address on
the interface.
(Example: 192.168.1.10 and
the Subnet Mask address as
255.255.255.0.
Quick Start Guide
ENS200EXT
|
ENS202EXT
|
ENS500EXT
version l.0
A) To congure the AP/Bridge, open a web browser. In the address
bar of the web browser, enter 192.168.1.1 and hit enter.
B) A login screen will appear. By default, the username of the AP/Bridge
is admin and the password is admin. Enter the current username and
password of the AP/Bridge and then click Login.
A) This device can operate in the following modes: Access Point,
Client Bridge, WDS AP, WDS Bridge, WDS Station and Client Router.
B) Click on the Operation Mode link under the System Properties.
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary
depending on many factors including environmental conditions, distance between devices,
radio interference in the operating environment, and mix of devices in the network. Features
and specications subject to change without notice. Trademarks and registered trademarks
are the property of their respective owners. For United States of America: Copyright © 2013
EnGenius Technologies, Inc. All rights reserved.
Technical Support Notes
Country of Purchase Service Center Service Information
North America
www.engeniuscanada.com
www.engeniustech.com
Central & South America
es.engeniustech.com
pg.engeniustech.com
Europe
www.engeniusnetworks.eu
Africa
CIS
Middle East
Russia
www.engenius-me.com
Asia
Oceania
www.engeniustech.com.sg
Others
www.engeniusnetworks.com
Canada
Toll Free: (+1) 888 397 2788
Local: (+1) 905 940 8181
Toll Free: (+1) 888 735 7888
Local: (+1) 714 432 8668
Miami: (+1) 305 887 7378
Sao Paulo, Brazil: (+55) 11 3957 0303
D.F, Mexico: (+52) 55 1163 8894
(+31) 40 8200 887
Toll Free:
U.A.E.: 800-EnGenius
800-364-364-87
General:
(+971) 4 357 5599
Singapore www.engeniustech.com.sg/e_warranty_form
techsupport@engeniustech.com.sg
Toll Free:
Singapore: 1800 364 3648
1
Connecting the AP/Bridge
A
A
B
B
4
Switching Modes
3
AP/Bridge Setup
2
IP Address Conguration
Outdoor Access Point/Client Bridge
AP/Bridge
Power AdapterPoE Injector
Quick Start
Guide
Detachable
5 dBi Antenna
(1x ENS200EXT
|
2x ENS202EXT
|
2x ENS500EXT)
C
C
Pole Mounting
Strap x2
Wall Mount
Screw Set
D
E
F
To Computer
LAN
DC
IN
PoE
ENS200EXT ENS202EXT
ENS500EXT
Quick Start Guide
ENS200EXT
|
ENS202EXT
|
ENS500EXT
version l.0
Outdoor Access Point/Client Bridge
(76 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels