EnGenius ECB9500 Manuel d'utilisateur télécharger pdf (Page 56)

Multi-Function Gigabit Wireless-N Client Bridge Version 1.0

3.3.3 WAN (Bridge/Router)

 Click on the WAN link on the Network navigation drop-down menu. This device can

be configured at a Router or a Bridge. Select Enable (Router) mode if the WAN port

is connected to the Internet. Select Disable (Bridge) if the device is connected to a

local network downstream from another router.

 The device supports the following WAN connections:

o Static IP address

o Dynamic IP address

o PPPoE

o PPTP

3.3.3.1 WAN – Static IP address

 The WAN interface can be configured as Static IP address. In this type of connection,

your ISP provides you with a dedicated IP address (which does not change as

DHCP).

 Login Method: Select the Static IP Address from the drop-down list.

 IP Address: Specify the IP address for this device, which is assigned by your ISP.

 Subnet Mask: Specify the subnet mask for this IP address, which is assigned by

your ISP.

 Default Gateway: Specify the IP address of the default gateway, which is assigned

by your ISP.

 Primary / Secondary DNS Address: Specify the primary and secondary IP address,

which is assigned by your ISP.

 Click on the Apply button to save the changes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 70 71

Pas de commentaire

EnGenius ECB9500 Manuel d'utilisateur Page 56