EnGenius EOC5510 Manuel d'utilisateur télécharger pdf (Page 61)

WDS Bridge

Step1 Login to the web-based configuration interface with default IP 192.168.1.1

Step2 Select your country or region’s regulation.

Step3 Select Operation Mode to WDS Bridge from System Properties.

Step4 802.11a (5GHz) wireless network.

Step5 Select channel you would like to use.

Step6 Setup the authentication settings

Step7 Setup WDS Link Settings.

Step8 Specify the AP’s MAC address you would like to connect with.

Step9 Press Apply to process all the configurations.

Auction: Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting.

9.4 Client Router

In the Client Router Mode, the EOC5510 has DHCP Server build inside that allows many LANs

automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and

connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.

1 2 ... 56 57 58 59 60 61 62 63

Pas de commentaire

EnGenius EOC5510 Manuel d'utilisateur Page 61