EnGenius EAP1750H Manuel d'utilisateur télécharger pdf (Page 28)

Operation Modes

TheEAP1750Hsupportsthreeoperationmodes:

Access Point, WDS AP, and WDS Bridge.

Device Settings

To access operation mode, click the Wireless link under the

Network menu. You will see customizable wireless settings

options for both 2.4 GHz and 5 GHz bands. Under Wireless

settings,youwillsee:

Device Name: Enter a name for the device. The name you

type will appear in SNMP management. This name is not

the SSID and is not broadcasted to other devices.

Country/Region: Select a Country/Region to conform to

local regulations.

Operation Mode: Select an operating mode from the

drop-down list.

Band Steering: Enable Band Steering to so D e t e c t s

and allows Dual Band clients to shift to the 5 GHz band

from the 2.4 GHz band, relieving network congestion and

maintainoptimaldatatrafcow.

*Note:InorderfortheBandSteeringfeaturetoworkproperly,

both the 2.4 Ghz and the 5 GHz SSID and security settings must be

conguredunderthesamesettings.

Basic

This page allows you to modify the device’s IP settings.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Pas de commentaire

EnGenius EAP1750H Manuel d'utilisateur Page 28