EnGenius EAP1750H Manuel d'utilisateur télécharger pdf (Page 48)

SNMP Settings

This page allows you to assign the Contact Details, Location,

Community Name, and Trap Settings for Simple Network

Management Protocol (SNMP). This is a networking

management protocol used to monitor network attached

devices. SNMP allows messages (called protocol data units)

to be sent to various parts of the network. Upon receiving

these messages, SNMP compatible devices (called agents)

returns the data stored in their Management Information

Bases.TocongureSNMPSettings,clickundertheAdvanced

link under the Management section.

Status:EnablesordisablestheSNMPfeature.

Contact: Speciesthecontactdetailsofthedevice.

Location: Speciesthelocationofthedevice.

Port:Displaystheportnumber.

Community Name (Read Only): Species the password

for the SNMP community for read only access.

Community Name (Read/Write):Speciesthe password

for the SNMP community with read/write access.

Trap Destination Address: Species the port and IP

address of the computer that will receive the SNMP traps.

Trap Destination Community Name: Species the

password for the SNMP trap community.

SNMPv3 Status: Enables or disables the SNMPv3 feature.

User Name: Species the username for the SNMPv3.

feature.

Auth Protocol: Select the Authentication Protocol type:

MDS or SHA.

AuthfKey:fSpecifieshthehAuthenticationhKeyhfor

authentication.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Pas de commentaire

EnGenius EAP1750H Manuel d'utilisateur Page 48